Filetype PDF | Posted on 14 Sep 2022 | 3 years ago
Authentication
digital resources
304x Filetype PDF File size 0.49 MB Source: ir.uitm.edu.my
Journal of Academia Vol. 9, Issue 1 (2021) 173 – 184
REVIEW ON EXTRACTION METHODS OF ESSENTIAL OIL FROM
KAFFIR LIME (Citrus hystrix) LEAVES
1* 1 1
Mazlin Mohideen , Mohamad Iqbal Hazmie Idris , Nor Syamimi Izzati Zainal Abidin ,
2
Nur Azzalia Kamaruzaman
1Faculty of Pharmacy and Health Sciences, Universiti Kuala Lumpur - Royal College of Medicine Perak (UniKL-RCMP),
30450 Ipoh, Perak, Malaysia
2National Poison Centre, Universiti Sains Malaysia (USM), 11800 Minden, Pulau Pinang, Malaysia
*Corresponding author: mazlin.mohideen@unikl.edu.my
Abstract
Kaffir lime or “limau purut” (Citrus hystrix) is a popular traditional herbal plant with aromatic leaves. It
produces fruits which are commonly used in Asian cuisines as a flavouring agent. Essential oil has been a
popular and valuable product applicable in various industries, but its availability is scarce. Essential oil
from the leaves of Citrus hystrix is a complex mixture of volatile and semi-volatile compounds. It is rich in
bioactive molecules that act synergistically to improve the well-being of an individual. Essential oil is
extracted from Citrus hystrix leaves using a few extraction methods; however, the most excellent extraction
methods have yet to be ascertained. This review paper highlights several extraction methods that determined
the final yield of Citrus hystrix leaves’ essential oil and the comparison of advantages and disadvantages
between each method. Two types of methods are discussed, which are conventional and modern methods.
Conventional methods include hydro-distillation, steam distillation, Soxhlet distillation and solvent
extraction, while the modern method includes pressurized liquid extraction (PLE). In addition, pre-
treatment processes are also included as they can significantly affect the performance of other important
processes and production yield. This paper also found that the highest yield of 56.16% was obtained using
PLE method. Essentially, each of the extraction and pre-treatment methods has its own pros and cons; hence
choosing a suitable method depends heavily on the producer's demand and requirement.
Keywords: Citrus hystrix, Kaffir lime, Essential oil, Leaves, Extraction method.
Article History: - Received: 15 November 2020; Accepted: 30 April 2021; Published: 30 April 2021
© by Universiti Teknologi MARA, Cawangan Negeri Sembilan, 2021, e-ISSN: 2289-6368
Introduction
Kaffir lime or “limau purut,” also scientifically known as Citrus hystrix (C. hystrix), is an herbal plant from
the Rutaceae family. The plant is widely cultivated in several Asian countries, such as Malaysia, Thailand
and Indonesia. The colour of C. hystrix leaves is dark green with a shiny shine. Due to its aromatic, robust,
spicy and unique flavour, C. hystrix leaves and fruits are regularly used as essential ingredients in soups
and curries, especially in Asian culinary dishes. The plant can also be used in the fermentation process for
non-alcoholic and alcoholic drinks. Its leaves, either fresh or dried, can be frozen for other purposes as well
(Lim, 2012; Budiarto et al., 2019). In Thailand, C. hystrix flavonoid-rich sachet is used to flavour tea for
drinking. Its leaves have also been used as a treatment for scurvy and to preserve healthy gums and teeth.
Furthermore, C. hystrix juice is commonly used to enhance appetite, dispel gas, as well as for blood
detoxification, and maintaining healthy condition for hair and scalp (Anuchapreeda et al., 2020). In
addition, the leaves' extracts have been reported to possess anti-inflammatory, antioxidant and anticancer
properties (Abirami et al., 2014; Nararak et al., 2016).
C. hystrix stands as a small tree with a width of 2.5 - 3 m and a height of 3 - 6 m, and is usually crooked,
with spiny and glabrous branches (Figure 1a). Its leaves are distinctive among the varieties of citrus species;
it is unifoliate, alternate, roughly ovate-oblong to ovate shape, which is 7.5 - 10 cm long, has a dark green
top with lighter bottom, and immensely aromatic. The long petiole is prolonged into notable wings, about
173
Journal of Academia Vol. 9, Issue 1 (2021) 173 – 184
15 cm long and 5 cm wide. The leaves grow into two sections, apparently by a double leaf (Figure 1b). The
prolonged petiole and leaves emerge as single “pinched” leaf. The leaf base is rounded or cuneate,
moderately acuminate, notched or apex obtuse (Lim, 2012; Kusuma and Mahfud, 2017). The flower (Figure
1c) is aromatic, small, white in colour, with a four-lobed calyx cuspidation, and has an ovate-oblong shape
with a long violet fringe. The fruit has a large size, globose, verrucose, bumpy or warty, elliptic or ovoid,
and colour may turn from green to yellowish-green when ripe. The fruit's diameter is approximately 5 - 7
cm. It has a thick rind with yellowish pulp, which has bitter and acidic tastes (Figure 1d). The C. hystrix
fruit produces numerous seeds that are ridged and have an oval, oblong shape; each seed's size is about 1 -
1.2 cm. Seed embryo is monoembryonic with white cotyledons (Figure 1e) (Lim, 2012; Kusuma and
Mahfud, 2017).
(a) (b)
(c) (d) (e)
Figure 1: (a) Tree (adapted from Nye Noona-WordPress.com); (b) Leaves (adapted from PurelyFresh.com); (c)
Flowers (adapted from Flickr.com); (d) Fruits (adapted from I Net-Farm.com); (e) Seeds (adapted from eBay.com)
According to European Pharmacopoeia and International Standard Organization (ISO 9235: 2013),
“essential oil” is the term used for a product achieved from a plant or a vegetable, through the process of
distillation using steam or water, or from the citrus fruits flavedo by dry distillation or mechanical process
(Lim, 2012). The merging of semi-volatile compounds with volatile compounds makes essential oil, which
commonly has a strong odour, infrequently coloured, insoluble in water and soluble in organic solvents.
Using different biosynthetic paths and primary precursors to synthesize, the essential oil contains non-
terpenoid and terpenoid origins of volatile compounds. The role of essential oil as an important component
in various products, from aromatics and food to agriculture and medicine, has propelled essential oil as a
high demand product. Furthermore, essential oil is frequently used in treating anxiety and depression due
to its pleasant and soothing aromatic smell (Ades, 2009; Russo, 2011; Guzmán-Gutiérrez et al., 2015).
C. hystrix essential oil has been stated to exhibit analgesic, sedative, spasmolytic, anaesthetic, anti-
inflammatory and antimicrobial properties (Luangnarumitchai et al., 2007; Bakkali et al., 2008). It is
174
Journal of Academia Vol. 9, Issue 1 (2021) 173 – 184
anticancerous, as evidence has suggested its ability in killing cancer cells and inhibiting cancer cell growth
(Bakkali et al., 2008). Moreover, the presence of β-citronellal in C. hystrix essential oil contributes to
agriculture, whereby the oil acts as an effective agent in eliminating rice weevil in rice production (Loh et
al., 2011; Othman et al., 2016; Agouillal et al., 2017).
The C. hystrix essential oil composition and content have been claimed to have diverse bioactivities. There
are 38 identified constituents in C. hystrix leaves’ essential oils, representing 89% of the oil's total
composition. The essential oil is potent in monoterpenes (87%) and other minor components such as
limonene (4.7%) and β-pinene (10%) and it is distinguished by a high content of α-terpineol (7.6%),
terpinen-4-ol (13%), citronellol (6%) and 1.8-cineole (6.4%). On the other hand, other research has
discovered that essential oil of C. hystrix leaves have 29 compounds, with β-citronellal as the major
component at 66.85% of the total oils (Wulandari et al., 2019). It was also identified that the main volatile
compounds present in the C. hystrix leaves were citronellal (72.4%), β-citronellol (6.7%), α-pinene (1.9%)
and citronellyl acetate (4.1%) (Othman et al., 2016). In comparison, the minor component was limonene
(0.1%) (Othman et al., 2016; Agouillal et al., 2017). However, dried leaves have different concentrations
of components when compared to fresh leaves, as the major compounds were β-citronellal (69.96%),
β-citronellol (6.67%), and linalool (3.86%) (Ismail and Sauid, 2016). Another study found that β-citronellal
was a major compound in C. hystrix, with 66.85% of total oil yield (Wulandari et al., 2019). By comparison
to the outcomes of a separate study, the C. hystrix essential oils were identified to contain α-farnesene and
camphor (Loh et al., 2011). Rarely, C. hystrix essential oils' composition differs for different parts of the
plant, between the single leaf of oil glands through polymorphism of phytochemical (Johnson et al., 2004).
However, the yield of oils is mostly affected by the plant's growth phases, such as vegetative, fruiting, and
flowering (Johnson et al., 2004; Novak et al., 2006; Slavkovska et al., 2013). The region and location where
the plant was taken also affects oil yield and its compositions (Dardioti et al., 2012). Consequently, slight
inconsistencies may occur between different studies, even though the same methodology is utilized.
In addition to discrepancies between plants, the composition and yield of oils are also affected by the
different extraction methods. Each method has its effects on the sample. Conventional methods to extract
bioactive compounds from plants and herbs, such as hydro-distillation and Soxhlet extraction, have been
used a long time ago. With advanced technology, more extraction methods have since been discovered.
This review paper aims to summarize a few profound, impactful studies that reported various performances
of the new techniques and the essential oils' respective chemical compositions. Hydro-distillation, steam
distillation, solvent extraction, Soxhlet extraction and pressurized liquid extraction methods were
investigated in terms of their yield, process conditions for extraction and major compounds.
Material and methods
In this review paper, Google Scholar was used as the search engine. References used for this paper were
based on Springer Nature, ScienceDirect database and other databases using a combination of different
keywords such as “Kaffir lime,” “Citrus hystrix,” “Antimicrobial of Citrus hystrix,” “Citrus hystrix
essential oil,” “Kaffir lime active compounds,” and “Kaffir lime extraction method”. Relevant articles were
also reviewed for additional background and support.
Results and discussion
A. Kaffir lime extraction method
Extraction methods majorly affect the production yield and composition of essential oil. Conventional
methods like hydro-distillation, steam distillation, Soxhlet extraction and solvent extraction are cost-
efficient and easy to implement. On the other hand, modern method like pressurized liquid extraction (PLE)
requires high installation cost and technical knowledge. However, modern method can provide high-quality
essential oil (El Asbahani et al., 2015). Therefore, the method and solvent used should be selected carefully
as both affect the quality and quantity of the product to be obtained. In extracting essential oil from
175
Journal of Academia Vol. 9, Issue 1 (2021) 173 – 184
C. hystrix, the leave’s peels in fresh and dry forms were utilized. Similarly, hydro-distillation, steam
distillation, solvent extraction, Soxhlet extraction and PLE methods are commonly used to extract essential
oil from Kaffir lime as they are simple and easy to handle.
Hydro-distillation
Hydro-distillation, also known as water distillation, is a conventional method for extracting essential oil
from aromatic plant materials. The characteristics of hydro-distillation (Figure 2a) are simple, eco-friendly,
relatively cheap, and able to produce excellent oil quality, making it the most regularly used method to
extract essential oils from medicinal plants and herbs (Chinese Pharmacopoeia Committee, 2010; Sauid
and Md Anjazi, 2015; Kusuma and Mahfud, 2016; Kusuma and Mahfud, 2017). It is also advantageous to
use the hydro-distillation method as it prevents damage to the leaves. The leaves are protected from
degradation and charring because the technique does not expose the leaves to direct heat. However, cautious
steps must be taken, such as avoiding excessive amounts of water that will cause high energy consumption
in maintaining optimum temperature, increasing the extraction temperature, and avoiding hydrolytic effect
to preserve the quality of oils and yield (Kusuma and Mahfud, 2017). The disadvantage of the hydro-
distillation extraction process is the lengthy time required. It commonly takes up to 4 hours to complete the
extraction process and averagely takes 3 hours to achieve the maximum peak of oil yield (Chanthaphon et
al., 2008; Rosli and Sauid, 2016; Bousbia et al., 2019), as exhibited in Table 1.
Table 1: The effect of hydro-distillation period on yield ((Chanthaphon et al. 2008; Rosli and Sauid, 2016)
Hydro-distillation period (h) Yield (%)
2.59 1.14
3.00 1.75
4.00 1.5
5.00 1.3
5.41 1.23
Steam distillation
Steam distillation is one of the preferred distillation methods for extracting essential oil from sensitive to
high temperature from plant materials. It is one of the most widely used methods for extracting essential oil
from plant materials on a large scale (Tongnuanchan and Benjakul, 2014; Reyes-Jurado et al., 2015). The
extraction procedure of essential oils can also be conducted using a Clevenger-type apparatus (Figure 2b)
of steam distillation. The steam distillation procedure leaves are prepared by placing them in a packed bed
just above the water level or plunged in the water. The water is heated, and steam passes over the leaves,
causing cell structure to break down, thus releasing volatile components in the process. The flask is used to
collect vapour or steam; both water and oil are contained in the condensate, whereby lower degree
condensate will dissolve the water-soluble compounds (Tongnuanchan and Benjakul, 2014; Sauid and
Aswandi, 2018). In this process, the maximum production yield will take almost 2 hours (Yusuff and Sauid,
2016). As the steam temperature is increased, more oil is extracted. This assumption was confirmed,
whereby it was found that steam temperature increase would spontaneously increase the yield of essential
oil (Yusuff and Sauid, 2016). The maximum result was attained at 2.94%, 95 °C.
Soxhlet extraction
Soxhlet extraction is a continuous solid/liquid extraction process used commonly when the compound of
interest has limited solubility in the solvent. Volatile compounds can be obtained from raw materials by
using Soxhlet extraction (Figure 2c). The process starts by boiling the limited solubility solute and solution
together in a percolator; the concentrated solute condensate is collected from the reservoir. The final yield
for essential oils using Soxhlet extraction and ethanol as a solvent for 22.5 hours at 81 - 96 °C was 13.39%
176
no reviews yet
Please Login to review.
