Filetype PDF | Posted on 06 Feb 2023 | 2 years ago
Authentication
digital resources
138x Filetype PDF File size 0.25 MB Source: www.alliedacademies.org
Journal of Economics and Economic Education Research Volume 16, Number 1, 2015
EFFECT OF INVENTORY MANAGEMENT
EFFICIENCY ON PROFITABILITY:
CURRENT EVIDENCE
FROM THE U.S. MANUFACTURING INDUSTRY
Seungjae Shin, Mississippi State University
Kevin L. Ennis, Mississippi State University
W. Paul Spurlin, Mississippi State University
ABSTRACT
While manufacturing firms pursue efficient inventory management, there is limited
evidence of improved financial performance related to inventory management practices. This
paper examines financial statement data for U.S. manufacturing firms to explore the relationship
between inventory management efficiency and firm profitability. The results show that a lower
ratio of inventory to sales for a firm is associated with higher profit margin for the firm. In
addition, small size firms can receive a larger benefit (as measured by profitability) from
increased inventory efficiency when compared to medium and large size firms.
Key words: Inventory Management, Profitability, U.S. Manufacturing Industry
INTRODUCTION
Maintaining an appropriate level of inventory is a key issue to firms’ operational performance.
The supposition is that better inventory management is closely related with firms’ better
financial performance. Appropriate inventory levels depend on the production schedule as a
managerial response to market demand. Inventory is a current asset to a firm, but it is costly to
maintain as it waits to be converted into future sales. While excess inventory does increase costs,
a shortage of inventory may result in lost sales. Prior research has focused on inventory
management methods and optimal inventory sizes as they relate to the balance between more
technological information systems, inventory cost savings and production/sales efficiency.
Inventory management has evolved into a highly studied and practiced concept in the business
world that combines optimizing inventory movement, information-sharing between buyer and
seller, lean production strategies, and supply chain management concepts. The core of the current
inventory management system is Just-In-Time (JIT) inventory systems.
JIT is a philosophy of management that reduces waste and improves quality in all
business process (Harrison and Hoek, 2011). JIT has been applied to many Japanese
manufacturing firms since the 1970s (Cheng and Podolsky, 1996). JIT originated from the
Toyota production system (TPS) and serves to reduce inventory and lead-time while increasing
quality of production. JIT is defined as, “an inventory strategy aimed at improving a business’
financial performance by reducing excess inventory and its associated cost” (Sungard, 2007). To
implement a JIT inventory system, a sound, long-term relationship with suppliers is critical
because suppliers have to fill the inventory as soon as it reaches a minimum level. Therefore,
sharing information about the production schedule with part suppliers and delivery companies is
98
Journal of Economics and Economic Education Research Volume 16, Number 1, 2015
essential. This information sharing is now available through a modern IT infrastructure utilizing
the Internet and Enterprise Resource Planning (ERP).
ERP was introduced in the 1990s as an enterprise information system designed to
integrate production and accounting data and functions across organizations. The main goal of
ERP is to share data by all functional departments and to access the data immediately to increase
prompt decision making (Motiwalla and Thompson, 2009). Together, the Internet and ERP
systems dramatically improve the JIT inventory system, allowing real time information tracking
and sharing of both production and accounting information. JIT inventory management and the
utilization of Internet and ERP systems provides for a “lean production” opportunity.
The concept of lean production is to minimize inventory and has been widely used since
the 1990s (Eroglu and Hofer, 2011). JIT is the heart of the lean production systems. In the late
1990’s, the JIT and ERP concepts expanded into a concept known as Supply Chain Management
(SCM). The supply chain is defined as “management of network of interconnected business,” to
satisfy customers’ requests (Harland, 1996).
As stated above, the implementation of a technological complete inventory management
system to determine an appropriate or optimal inventory level is a critical factor to a firms’
financial performance. Better inventory management such as higher inventory turnovers, reduced
days-in-inventory, or lower level of inventory-to-sales ratio is closely related with firms’ better
financial performance (Shah & Shin, 2007). Using data collected from the late 1960’s; the late
1990’s; and some early 2000’s, prior studies investigated the relationship between inventory
level and firm’s financial performance. A sample of these studies is delineated in our next
section of this paper. This prior research offers both numerous and conflicting results as both
positive relationships and negative relationships were determined. In addition, inventory
management and its impact on financial performance based on firm size was not considered.
Because a definitive answer does not exist as to whether optimizing inventory management is
related to superior firm financial performance and does the impact differ based on manufacturing
firm size, this paper investigates whether successfully managing a low level of inventory will
result in higher profitability for the firm. These conflicting relationships and lack of information
of the impact on firm size coupled with our utilization of more recent data from U.S.
manufacturing firms leads us to a single research hypothesis which states:
Hypothesis: A significant relation exists between firm profitability and inventory
management efficiency in U.S. manufacturing industry.
This study begins with a brief literature review followed by data collection methods,
research analysis, and a conclusion.
LITERATURE REVIEW
The concept of Supply Chain Management and technologically managing inventory has
helped a lot of companies to compete more effectively in their business markets. Kannan and
Tan (2004) point out the three popular methods used in order to ensure that the product or
service is delivered to the customer in the most efficient way possible. These three methods are
JIT, Total Quality Management (TQM), and SCM. All three of these methods go hand in hand
because they force the company to eliminate waste while increasing the quality of their products
and distribution systems. Their research demonstrates that integrated inventory management
99
Journal of Economics and Economic Education Research Volume 16, Number 1, 2015
methods are correlated with firm financial performance. Using return of assets (ROA) as a
measure of financial performance, Kannan and Tan (2004) set out to not only reiterate the impact
on firm’s operational performance, but also point out that the firm’s business performance can
benefit from an inventory management system. Their results concluded that integrating a
technological inventory management system results in higher ROA.
Shah and Shin (2007) investigate the relationship among IT investment, inventory, and
financial performance with industry sector level data of 1960 to 1999. They find that lower
inventory levels lead to higher financial performance in manufacturing sector. Their conclusion
is that there exists indirect effect on financial performance through inventory management from
IT investment. Liberman and Demeester (1999) study Japanese car manufacturers’ JIT
production with data of late 1960s to early 1990s. They find that there is a causal relationship
between work-in-process inventory and firm’s productivity, i.e., 10% reduction in inventory
leads to 1% increase of labor productivity. Thomas (2002) studies inventory changes and future
returns with data from 1970 through 1997. He finds that a firm with inventory increase has
experiences higher level of profitability, however, this trend changes immediately with a change
of inventory decrease. He finds the negative relationship between inventory level and firm’s
profitability but he cannot explain the reason. The result from Thomas (2002) conflicts with
results from both Liberman and Demeester (1999) and Shah and Shin (2007). Chen, Frank and
Wu (2005) investigate inventories of U.S. manufacturing companies in the last two decades of
20th century. They find that firms with high inventory have poor long-term stock returns while
firms with slightly lower than average inventory have good stock returns. However, firms with
lowest inventory have only normal returns. All four papers study about the relationship with
financial performance of U.S. manufacturing industry. But their results are not consistent. The
data used in the previous four papers are data of 20th century. Roumiantsev and Netessine (2007)
investigated linkage of inventory behavior with financial performance. They found that lower
inventory levels are positively associated with return on sales. Capkun et al. (2009) found a
significant positive correlation between inventory performance and measures of financial
performance in manufacturing companies over 26 year period from 1980 to 2005.
Profitability is a concept that a lot of executives and shareholders put emphasis on. This
shows them that their company is operating at a level to where more money is coming in than
leaving the company. Gill, Biger, and Muthur (2010) discusses the relationship that occurs
between the firm’s working capital management and profitability. They define working capital as
being involved with current assets and current liabilities while being able to finance these current
assets. The main difference between inventory management and working capital management is
the fact that working capital management involves managing all of the current assets while
inventory management focuses its efforts on inventories alone. Gill et al. (2010) stated that they
do not see any relationship between days of accounts payable and profitability or even with days
in inventory and profitability. They note that past studies have given results that differ from their
own. Given conflicting results in previous studies, we are motivated to offer evidence as to
whether inventory management and profitability are related.
DATA
Using the Compustat database, the authors obtain annual balance sheet and income
statement data for US manufacturing firms. Manufacturing firms are identified in the database by
using the NAICS (North America Industry Classification System) code. Manufacturing
100
Journal of Economics and Economic Education Research Volume 16, Number 1, 2015
companies have a NAICS code beginning with 31, 32, and 33. The authors conduct tests on two
sets of data: The first data set is made of three years of data from 2005 and 2007, and the second
expands the time window to eight years, from 2005 to 2012. Table 1 presents the two data sets.
Table 1
Data Sets
Data Set I Data Set II
Periods 2005 ~ 2007 (3 years) 2005 ~ 2012 (8 years)
Number of Firms 1,289 959
Number of Observation 3,867 7,672
The total number of manufacturing companies, which are listed in the U.S. stock markets
in 2005 is 1,292. Among them, 1,289 U.S. manufacturing firms are listed for three years from
2005 and 959 firms are listed for eight years. The number of firms decreases in our sample when
the sample period is increased to eight years because we use a balanced panel and annual
observations for sample firms that are available for all years in the first sample are not available
for all firms in the second sample. Data set I ends with fiscal year 2007 in an attempt to avoid
our data being influenced by the financial crisis beginning in 2008. During the financial crisis
2008 through 2009, many companies were delisted (Erkens, Hung, and Matos, 2012). To form a
balanced panel of data, we require observations for sample firms to occur in all three or eight
years and to include all financial statement items so that our final sample includes a total of
1,289 / 959 firms times 3 years / 8 years. Profit margin (PM), calculated as the ratio of net
income to total revenue, is used as our measurement of a company’s profitability, and inventory-
sales-ratio (ISR), calculated as total inventory divided by total revenue, is used to measure
inventory management efficiency with a lower ISR being interpreted as a higher level of
inventory management efficiency.
ANALYSIS I
This study uses cross-sectional, time-series panel data. Cross-sectional variables are ISR
and PM collected for 1,289 U.S. manufacturing companies. The time series for these variables is
collected for three consecutive years. The total number of observations is 3,867. We classified
these data into three groups based on size of year-firm revenue (table 2): (1) Small size
companies with less than or equal to $100 million dollars per year, (2) medium size company
with an annual revenue between $100 million dollars and $1 billion dollars, and (3) large size
company with greater than or equal to $1 billion dollars per year. Using this convention, a firm
may appear as a different size from one year to the next in our sample. The authors assumed that
company’s inventory management efficiency depends on the size of the company. The average
ISR for the large companies is 0.1265 and those for the medium and small companies are 0.154
and 0.229 respectively.
Table 2
Classification of Company Size and average ISR
Size Criteria Number of Observations Average ISR
Small ≤ $ 100 M 1030 0.228890
Medium Between $100 M and $ 1 B 1554 0.154085
Large ≥ $1B 1283 0.126500
101
no reviews yet
Please Login to review.
